Zitat von "alexicon"who have openmediavault-virtualbox version 0.6 or 0.6.1 or 0.6.2 or 0.6.2.1?
Why do you want those versions?
Virtualbox on OMV Kralizey
-
-
Hi, ryecoaaron!
newer versions do not work phpVirtualBox http://forums.openmediavault.o…13&t=5108&start=10#p44921 -
Just fixed it in 1.0.9.2. May have to reboot.
-
-
update on 1.0.9.2
not reboot
but
1. Untick Enable
2. Save
3. Tick Enable
4. Save.
5. Apply
phpVirtualBox work, all ok
Thank you very much! -
Anything to restart php5-fpm will work. So, yes, your method works too. I just figured rebooting was easier.
-
-
-
ryecoaaron
Thanks it works now -
Welcome.
There is a problem with VitrualBox.The machine has the following parameters:
Motherboard: IBASE MB935R
Processor: Intel® Core ™ 2 Quad Processor Q9400
RAM: 2 GB DDR2
HDD: HDD 1 Tb SATA-II 300 Western Digital RE4 <WD1003FBYX> 3.5 "7200rpm 64Mb
System: OMV 1.0.9 Kralizec on Debian 7.6 x64 installed on a flash drive QUMO 4Gb Domino blueCreate a virtual machine on startup phpVirtualBox climbs here is:
There was an error obtaining the list of registered virtual machines from VirtualBox. Make sure vboxwebsrv is running and that the settings in config.php are correct.The list of virtual machines will not begin auto-refreshing again until this page is reloaded.HTTP error: 502 Bad GatewayDetails
readyState: "4"
responseText: "
502 Bad Gateway502 Bad Gateway
nginx"
status: "502"
statusText: "Bad Gateway"Then the machine hangs and only helps physical reboot.
In the terminal, car climbs here is:
Filter subsystem: Built-in target `write': Dispatching value to all write pluginsrrdcached plugin: rrdc_connect (unix:/var/run/rrdcached.sock) failed with status -
installed on a flash drive QUMO 4Gb Domino blue
This is your problem. Your flash drive is failing. We always recommend against flash drives that do not have static wear leveling (typically found on SSDs). -
-
Prior to this there was a system of OMV 0.5.48 on the same flash drive, only the server had a notebook Acer Extensa 4220 and everything works fine.
-
The flash drive has hit its limit of writes and is failing. Not much else I can say.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!