Sorry, I have no experiences with proxy-pass, but it sounds good
And forget what I meant concerning "name-based".
I see, thats not exactly want you need.
Only if you manage to run the OMV webif also name-based (haven't tried this yet).
Then both could run under 80.
Owncloud 8 and MySQL: alternative approach
-
- OMV 2.x
- Enra
-
-
I tried your guide but I wasn't shure what to do with MySQL.
When I enter https://192.168.2.10:91/ and http://192.168.2.10:90
I get 'File not found' -
I tried your guide but I wasn't shure what to do with MySQL.
You have to install the MySQL plugin if not already done.
You have to insert the MySQL credentials in the OC-setup wizzard.When I enter 192.168.2.10:91/ and 192.168.2.10:90
I get 'File not found'At which point do these messages come?
Did you run the setup-owncloud.php sucessfully? -
Can anyone help me with this Error Message?
I followed the guide, then i activated MySQL, set an directory and Password, then I get this message:Code
Alles anzeigenFehler #4000: exception 'OMVException' with message 'Failed to execute command 'export LANG=C; invoke-rc.d 'mysql' start 2>&1': Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed! invoke-rc.d: initscript mysql, action "start" failed.' in /usr/share/php/openmediavault/initscript.inc:176 Stack trace: #0 /usr/share/php/openmediavault/initscript.inc(141): OMVSysVInitScript->invoke('start') #1 /usr/share/php/openmediavault/initscript.inc(61): OMVSysVInitScript->start() #2 /usr/share/openmediavault/engined/module/mysql.inc(117): OMVSysVInitScript->exec() #3 /usr/share/openmediavault/engined/rpc/config.inc(206): OMVModuleMySQL->startService() #4 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array) #5 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #6 /usr/share/php/openmediavault/rpcservice.inc(158): OMVRpcServiceAbstract->callMethod('applyChanges', Array, Array) #7 /usr/share/openmediavault/engined/rpc/config.inc(224): OMVRpcServiceAbstract->callMethodBg('applyChanges', Array, Array) #8 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array) #9 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #10 /usr/share/php/openmediavault/rpc.inc(79): OMVRpcServiceAbstract->callMethod('applyChangesBg', Array, Array) #11 /usr/sbin/omv-engined(500): OMVRpc::exec('Config', 'applyChangesBg', Array, Array, 1) #12 {main}
-
I moved the .php file into the Owncloud Folder via extplorer and then upload. And then I thought I should open the ip adress to start the installation. But i just get the error above
I installey MySQL and activated it and gave it an Folder in the root directory on the same disk where the www Folder and the owncloud Folder are... is that right?
-
I moved the .php file into the Owncloud Folder via extplorer and then upload. And then I thought I should open the ip adress to start the installation. But i just get the error above
You have to type
192.168.2.10:90/setup-owncloud.phpI installey MySQL and activated it and gave it an Folder in the root directory on the same disk where the www Folder and the owncloud Folder are... is that right?
Should be OK.I followed the guide, then i activated MySQL, set an directory and Password, then I get this message:
Can't help. Perhaps a reboot will do that.
If not, i would try to reinstall MySQL.
Bit that is a little bit tricky. Search in the forum for hints. -
ok on Step 2 of the installation I get an 504 Gateway timed out....
But Owncloud seems reachable when I enter 192.168.2.10:90Now I'm stuck at configure your installation:
Is there a default password or do I set one in the MySQL Plugin tab?
-
ok on Step 2 of the installation I get an 504 Gateway timed out....
This may happen but I think that is mostly unimportant.Is there a default password or do I set one in the MySQL Plugin tab?
OC want to insert its own tables into the database.
Therfore it needs the credentials you entered in the MySQL plugin.
Usually "root" and the password you specified in the MySQL plugin. -
I still don't get it. Is it the one which I have marked in the attachment? Or do I have to set a password in the MyWebSQL management for some user? http://192.168.2.10/mysql/
-
It is the password in the plugin under
"MySQL root-Passwort zuücksetzen"
Exactly the field you outlined in red.
Choose a PW and press
"Passwort zuücksetzen"
Use this PW in the OC installer, when asked for the database PW.
Note: The OC-Admin is NOT the database admin.
The OC-admin is created in the database automatically by the OC setup-wizzard with the help of the credentials of the MySQL plugin. -
I did what you suggested and copied the password, but I still get the Message user name and or password are not correct
-
-
yes that's the one
-
Post a screenshot.
Edit:
And have a look at the database with MyWebSQL:
Is there already a database called "owncloud"?
Is there a user in the database "mysql" /users called oc_admin? -
there it is
-
Sorry, no more ideas.
Check this:
And have a look at the database with MyWebSQL:
Is there already a database called "owncloud"?
Is there a user in the database "mysql" /users called oc_admin?Perhaps reinstall your database. But read hints in this forum how to do this. Its a little bit tricky.
-
the database owncloud is there but empty
the user is not there -
Erase the owncloud DB and try it again.
Last exit: reinstall MySQL -
can somebody install plugins or update from the owncloud - webgui ? I must do all the things manual with copy from folders
-
I have installed plugins (at least calendar and contacts) and updated to 8.0.3 within the webgui.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!