Failing to mount drives of my previous OMV setup (fresh install)

hi all,

I've just done a complete and fresh re install ....
I had a OMV 0.5 running fine, with a system disk + 2 hdd in RAID1

I've followed all the different steps mentioned in this post ( (Re)Installation of OpenMediaVault 1.0.X )

install went fine - exluding keyboard layout not correct (it was working fine previously)

but when I access to WebGUI, I can't re mount the drives

when I try to do this, I get this error message :

Error #6000:
exception 'OMVException' with message 'Failed to mount '01ca0504-6375-4b81-a983-af1e144d9e87': mount: no such partition found' in /usr/share/openmediavault/engined/rpc/filesystemmgmt.inc:918
Stack trace:
#0 [internal function]: OMVRpcServiceFileSystemMgmt->mount(Array, Array)
#1 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array)
#2 /usr/share/php/openmediavault/rpc.inc(79): OMVRpcServiceAbstract->callMethod('mount', Array, Array)
#3 /usr/sbin/omv-engined(501): OMVRpc::exec('FileSystemMgmt', 'mount', Array, Array, 1)
#4 {main}

rest seems to work well ..
I suspect it's easy, but I'm a bit of a noob so ...

thanks for your help guys

Chris

hi again,

ok, I have a better idea now : if, via the CLI, ...

I do a fdisk -l : I find another disk/volume (sorry, not sure what is the good term), in /dev/sdb1

I go and mount this disk/volume under the /media/01ca0504-6375-4b81-a983-af1e144d9e87

then this works

BUT only till the next reboot ...
I guess this operation is needed, but I have no idea on how to make it "persistent", as part of the normal boot...

edit : seems this has to be configured in the config.xml file of /etc/openmediavault
ok, sure, found the fstab section, but ...

any idea please ?

Chris

well, mine are internal SATA,

and still not solved

in fact, via the CLI : I can mount the drive ...

then it's done in the WebGUI

but ..as soon as I reboot ...
gone

I'll try to APPLY

nothing is asking me to APPLY

@ Raulfg3 : dont be sorry
thanks for the suggestion !

@KM0201 :
I've tried your suggestions

1) - no change

2) I have no fstab_taks or task file in the /var/lib/openmediavault ...
only 2 or 3 files, but nothing related to fstab

sure, but, empty ?
(easier like this anyway )

I've read that in fact most config is taken from the specific OMV /etc/openmediavault/config.xml file ...
I had backed it up before the re isntall, I've restored it ...

ok, let me try ...

edit : ok, well ... didnt change ...
I did reboot, even ...
for curiosity sake, I'll see if the newly created .json file still exists

no worries

anyway thanks for your help !

whats frustrating is that when I manually mount the disk/partition, it works

but then next reboot removes what I've done ...

should I back up my config.xml ?

edit : yes I'll do it

anyway, thanks, I'll try one of the next evenings !

good night and thanks
Chris

well, good point

anyway, the configuration from installation was not so long or difficult..

hi guys,

thanks too, mine is : ny5sEwOl

have a gooood day !
Chris