Temperature CPU?

  • I see the graph but the Temp Values are:
    0.5 Min 7.93 Avg 18.30 Max 6.20 Last
    The values are to small?!


    Can you post the output of the following 3 commands

    Code
    sensors
    ls /var/lib/rrdcached/db/localhost/sensors-*/
    cat /proc/cpuinfo


    Your hardware is being detected but its using a temp from another sensor and not the CPU.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

  • sensors:
    radeon-pci-0008
    Adapter: PCI adapter
    temp1: +9.0°C (crit = +120.0°C, hyst = +90.0°C)


    k10temp-pci-00c3
    Adapter: PCI adapter
    temp1: +15.0°C (high = +70.0°C)
    (crit = +70.0°C, hyst = +69.0°C)
    ________________________
    ls /var/lib/rrdcached/db/localhost/sensors-*/:
    /var/lib/rrdcached/db/localhost/sensors-k10temp-pci-00c3/:
    temperature-temp1.rrd


    /var/lib/rrdcached/db/localhost/sensors-radeon-pci-0008/:
    temperature-temp1.rrd
    ________________________
    cat /proc/cpuinfo:
    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 21
    model : 19
    model name : AMD A4-4000 APU with Radeon(tm) HD Graphics
    stepping : 1
    microcode : 0x6001119
    cpu MHz : 1400.000
    cache size : 1024 KB
    physical id : 0
    siblings : 2
    core id : 0
    cpu cores : 1
    apicid : 16
    initial apicid : 0
    fpu : yes
    fpu_exception : yes
    cpuid level : 13
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1
    bogomips : 5989.14
    TLB size : 1536 4K pages
    clflush size : 64
    cache_alignment : 64
    address sizes : 48 bits physical, 48 bits virtual
    power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro


    processor : 1
    vendor_id : AuthenticAMD
    cpu family : 21
    model : 19
    model name : AMD A4-4000 APU with Radeon(tm) HD Graphics
    stepping : 1
    microcode : 0x6001119
    cpu MHz : 3000.000
    cache size : 1024 KB
    physical id : 0
    siblings : 2
    core id : 1
    cpu cores : 1
    apicid : 17
    initial apicid : 1
    fpu : yes
    fpu_exception : yes
    cpuid level : 13
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce tbm topoext perfctr_core perfctr_nb arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1
    bogomips : 5989.14
    TLB size : 1536 4K pages
    clflush size : 64
    cache_alignment : 64
    address sizes : 48 bits physical, 48 bits virtual
    power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro

  • It does look like its detecting the right sensor, the only way to be sure is to do cat /usr/share/openmediavault/mkconf/collectd.d/sensors and if you see lines like ${DATA}/sensors-k10temp-pci-00c3/temperature-temp1.rrd it is working ok

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

  • It does look like its detecting the right sensor, the only way to be sure is to do cat /usr/share/openmediavault/mkconf/collectd.d/sensors and if you see lines like ${DATA}/sensors-k10temp-pci-00c3/temperature-temp1.rrd it is working ok


    This is one line from output
    DEF:cpuc0avg=\${DATA}/sensors-k10temp-pci-00c3/temperature-temp1.rrd:value:AVERAGE \


    i take a look in the UEFI there a Temps ~ 40-50°C

  • temp1: +15.0°C



    I looks like your sensors report temps above 40, so when you look at the graphs you need to think of the value +40

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

  • i use the version is 3.3.2 Date 2012
    is it possible to update to 3.3.5?
    its the current version. and work the graph with this version?


    i get this message (run sensors-detect):


    Driver `w83627ehf':
    * ISA bus, address 0x290
    Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9)


    To load everything that is needed, add this to /etc/modules:
    #----cut here----
    # Chip drivers
    w83627ehf
    #----cut here----


    add this to modules?

  • You could try modprobe w83627ehf first as adding it to modules can cause problems, run lm-sensors after. If any thing goes wrong run rmmod w83627ehf

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

  • Code
    echo 'chip "k10temp-*"
    label temp1 "CPU Temp"
    compute  temp1  (@/2.56)+36.4921875, (@-36.4921875)*2.56' > /etc/sensors.d/k10temp.conf


    then try lm-sensor again.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

  • Tried installing 1.0.3 just now (on Kralizec 1.8), but when activating CPU temp and then hitting save I get this;


    Code
    Error #2002:
    exception 'OMVException' with message 'Invalid method parameter: buttonvalues-inputEl does not exist, and it is not an optional property.' in /usr/share/php/openmediavault/rpcservice.inc:187
    Stack trace:
    #0 /usr/share/openmediavault/engined/rpc/sensors.inc(122): OMVRpcServiceAbstract->validateMethodParams(Array, '{\n             ...')
    #1 [internal function]: OMVRpcServiceSensors->setSettings(Array, Array)
    #2 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array)
    #3 /usr/share/php/openmediavault/rpc.inc(79): OMVRpcServiceAbstract->callMethod('setSettings', Array, Array)
    #4 /usr/sbin/omv-engined(500): OMVRpc::exec('Sensors', 'setSettings', Array, Array, 1)
    #5 {main}


    Any suggestions?


    Reminder to myself: https://github.com/OpenMediaVa…rs/openmediavault-sensors
    PS: This should really be included in core along with the other graphs, just imagine on a busy media server doing much transcoding. Would be nice to keep an eye on thoes temps

  • When the new field was added to all plugins the code on git hub was not working and unfortunately this broken version was released.


    I will fix this by the weekend.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

  • Got a little side tracked, found issue and fixed it locally but still need to test it before committing. I also tried to correct the colour chooser menu but go nowhere so might squash that for now.


    Give me a couple of more days, I will post back here when done.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

  • I had wanted to fix the coloUr menu drop box but was unable to :(
    I will revert back to hard coded coloUrs.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!