Hi,
I just noticed that my newly installed OMV on RPi is running triggerhappy daemon. Is there a reason for this?
Normally, a NAS does not even have a keyboard attached ...
Why is triggerhappy daemon running on default installation on RPi?
-
- OMV 2.x
- badda
-
-
The images for the RPi are using Raspian as the base operating system. It is likely that it is installed on that image. That package may be needed for wireless remote too.
-
Hi,
I just noticed that my newly installed OMV on RPi is running triggerhappy daemon. Is there a reason for this?
Normally, a NAS does not even have a keyboard attached ...
When I first created the image, I removed all of the unnecessary packages from Raspbian. I guess I missed one -
uh, I just checked ... triggerhappy is needed for raspi-config.
Is there any need for raspi-config? afaik, most things can be configured using the web frontend ... -
Nope. I am pretty sure I removed raspi-config from the rpi3 image. Just in case you see it, rpi-update needs to stay.
-
-
One more thing ... can I remove "consolekit" package as well?
This will remove the dependend packages "colord" and "policykit-1".
Afaik, they're all used for graphical logins and not for a NAS. -
It should be ok to remove them. I know OMV doesn't depend on them.
-
Wow nice
KiB Mem: 494096 total, 170288 used, 323808 free, 13436 buffers
on my RPi 1 running OMV with Transmission and MiniDLNA plugins.Here's what I did:
- turn off monitoring
- remove package triggerhappy
- remove package consolekit
- comment out the following lines from /etc/inittab
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6
T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100
... and with overclocking the ARM CPU to 1GHz, I was able to double (!!) the SMB file transfer rates from 3,5 to 7 MB/sI love OMV
-
The RPi 2s and RPi 3s are a much improved over the older models.
-
Wow nice
KiB Mem: 494096 total, 170288 used, 323808 free, 13436 buffers
on my RPi 1 running OMV with Transmission and MiniDLNA plugins.Here's what I did:
- turn off monitoring
- remove package triggerhappy
- remove package consolekit
- comment out the following lines from /etc/inittab
2:23:respawn:/sbin/getty 38400 tty2
3:23:respawn:/sbin/getty 38400 tty3
4:23:respawn:/sbin/getty 38400 tty4
5:23:respawn:/sbin/getty 38400 tty5
6:23:respawn:/sbin/getty 38400 tty6
T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100
... and with overclocking the ARM CPU to 1GHz, I was able to double (!!) the SMB file transfer rates from 3,5 to 7 MB/sI love OMV
Thanks for the optimizations. I will make those changes to the next RPi image release.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!