Detected Hardware Unit Hang.

tinh_x7 · 15. April 2016

Hi guys,

Lately my OMV couldn't shutdown frequently because one of the NIC is hanging upon auto shutdown on daily basis.
It happens one or twice a week.
I've tried both kernels, and they both have the same issue.
Regardless whether the NIC is connect directly to the router or indirectly to the router (via UPS), error persist.
I'm currently using bonding: balance-alb.
My integrated NIC is my primary.
The screenshots are the error messages that appeared upon auto shutdown of a cron job.

OMV: v2.2.2

Error message:

Spoiler anzeigen

ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88083f0838d8), AE_NOT_FOUND (20140424/psparse-536)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88083f0838d8), AE_NOT_FOUND (20140424/psparse-536)
ata5.00: configured for UDMA/133
ata3.00: configured for UDMA/133
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88083f083860), AE_NOT_FOUND (20140424/psparse-536)
ata1.00: disabling queued TRIM support
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88083f083860), AE_NOT_FOUND (20140424/psparse-536)
ata6.00: configured for UDMA/133
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
PM: Basic memory bitmaps freed
Restarting tasks ...
pci_bus 0000:04: Allocating resources
pci 0000:03:00.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pci 0000:03:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci 0000:03:00.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:03:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:03:00.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:03:00.0: BAR 14: assigned [mem 0xbf200000-0xbf3fffff]
pci 0000:03:00.0: BAR 15: assigned [mem 0xbf400000-0xbf5fffff 64bit pref]
pci 0000:03:00.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:03:00.0: PCI bridge to [bus 04]
pci 0000:03:00.0: bridge window [io 0x2000-0x2fff]
pci 0000:03:00.0: bridge window [mem 0xbf200000-0xbf3fffff]
pci 0000:03:00.0: bridge window [mem 0xbf400000-0xbf5fffff 64bit pref]
pci 0000:03:00.0: no hotplug settings from platform
pci 0000:03:00.0: using default PCI settings
xhci_hcd 0000:05:00.0: no hotplug settings from platform
e1000e 0000:06:00.0: no hotplug settings from platform
done.
video LNXVIDEO:00: Restoring backlight state
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
TDH <0>
TDT <24>
next_to_use <24>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <100340d48>
next_to_watch <0>
jiffies <100340fee>
next_to_watch.status <0>
MAC Status <83>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
TDH <0>
TDT <24>
next_to_use <24>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <100340d48>
next_to_watch <0>
jiffies <1003411e1>
next_to_watch.status <0>
MAC Status <83>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
TDH <0>
TDT <24>
next_to_use <24>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <100340d48>
next_to_watch <0>
jiffies <1003413d5>
next_to_watch.status <0>
MAC Status <83>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
TDH <0>
TDT <24>
next_to_use <24>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <100340d48>
next_to_watch <0>
jiffies <1003415c9>
next_to_watch.status <0>
MAC Status <83>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>
e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang:
TDH <0>
TDT <24>
next_to_use <24>
next_to_clean <0>
buffer_info[next_to_clean]:
time_stamp <100340d48>
next_to_watch <0>
jiffies <1003417bd>
next_to_watch.status <0>
MAC Status <83>
PHY Status <796d>
PHY 1000BASE-T Status <3c00>
PHY Extended Status <3000>
PCI Status <10>

tinh_x7 · 15. April 2016

I think I found the solution:
http://serverfault.com/questio…tected-hardware-unit-hang

Zitat

Disabling TSO, GSO and GRO using ethtool:

ethtool -K eth0 gso off gro off tso off

and/or

Zitat

disable Active-State Power Management:
pcie_aspm=off

tinh_x7 · 17. April 2016

Tried with the above solutions, but it didn't work.

tinh_x7 · 20. April 2016

I've tried kernels: 3.16, 3.2.0, 4.5.1, but no luck.

Jetzt mitmachen!