No Raid 1 after reboot

  • I've installed the OMV 2.1 at a USB-Stick. After I set up the Mirror Raid (Raid 1) everything was o.k. till reboot.
    No Raid was shown in the Raid Tab. After rebuilding the raid was back with all data but this takes 6 hours!
    I've installed the OMV a second but it's still the same.


    this is the config of /etc/mdadm/mdadm.conf



    at the /etc/mdadm/mdadm.conf
    I can find this


    the is the output of the


    cat /proc/mdstat

    Code
    Personalities :
    unused devices: <none>


    blkid

    Code
    /dev/sdc1: UUID="ba68bcde-625c-44fc-b084-d9c3afcb7743" TYPE="ext4"
    /dev/sdc5: UUID="baaf2aa6-e86c-4b09-97d1-6f83a1cbe1ff" TYPE="swap"



    fdisk -l


    and this is the output before restarting the system:


    • Offizieller Beitrag

    Are the drives in the array usb drives? You installed omv on a usb stick? Did you install the flashmemory plugin? Is the USB stick new?

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • No the HDD are SATA drives direktly connected to to sata port at the mainboard.
    Yes I installed the flashmemory plugin an also did the changes at the fstab.
    Yes it was a new USB Stick.

    • Offizieller Beitrag

    What type of drives? Any errors in the logs? What type of system?

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • This is the configuration:


    HDS3 3000GB WD WD30EFRX RED 2x
    CPU 1150 Intel Core i3 4130 2x 3,4GHz Box
    MB 1150 ASUS B85M-G (C2)
    RAM DDR3 4GB PC3-12800 (1600MHz) CL11
    Crucial
    and a 16GB San Disk USB Stick.


    Yesterday I deleted all Hard drives and checked that here is no zero-superblock is left.
    After that I crated a RAid 1 with also a new Name (before called 3TB now Raid1)
    After the creation was finished (6hours) I added Drive with the Raid.
    Today a did a restart and the Raid is still there. I don't know why. Maybe there was a problem with the HDDs. I used them without any formation or something.


    I'll try some reboots now. But it seams to work.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!