Docker GUI plugin now stable

I'm getting the following error after installing the 3.0.9 and 3.1.0 update:

Error #0:
exception 'OMV\Exception' with message 'Failed to open
include file 'js/omvextras/window/RootFolderBrowser.js'.' in
/usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc:42
Stack trace:
#0
/usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(70):
OMV\ControlPanel\ControlPanelAbstract->scanFiles('js/omvextras/wi...',
Array)
#1
/usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(70):
OMV\ControlPanel\ControlPanelAbstract->scanFiles('js/omv/module/a...',
Array)
#2
/usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(70):
OMV\ControlPanel\ControlPanelAbstract->scanFiles('js/omv/module/a...',
Array)
#3
/usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(87):
OMV\ControlPanel\ControlPanelAbstract->scanFiles('js/omv/module/a...',
Array)
#4
/usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(90):
OMV\ControlPanel\ControlPanelAbstract->scanDir('js/omv/module/a...',
Array, true)
#5
/usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(90):
OMV\ControlPanel\ControlPanelAbstract->scanDir('js/omv/module/a...',
Array, true)
#6
/usr/share/php/openmediavault/controlpanel/administration.inc(53):
OMV\ControlPanel\ControlPanelAbstract->scanDir('js/omv/module/a...',
Array, true)
#7
/usr/share/php/openmediavault/controlpanel/controlpanelabstract.inc(168):
OMV\ControlPanel\Administration->getJavascriptIncludes()
#8 /var/www/openmediavault/index.php(41): OMV\ControlPanel\ControlPanelAbstract->render()
#9 {main}

Zitat von subzero79

I think you're missing omv-extras libraries. Can you post dpkg -l | grep omvextras

omv ~ # dpkg -l | grep omvextras
ii openmediavault-omvextrasorg 3.3.8 all OMV-Extras.org Package Repositories for OpenMediaVault

I also upgraded from 3.0.13 to 3.0.26 so I'm not sure if something got messed up during the upgrade.

If I uninstall the Docker plugin I can login just fine.

Zitat von razorslinky

omv ~ # dpkg -l | grep omvextrasii openmediavault-omvextrasorg 3.3.8 all OMV-Extras.org Package Repositories for OpenMediaVault

I also upgraded from 3.0.13 to 3.0.26 so I'm not sure if something got messed up during the upgrade.

If I uninstall the Docker plugin I can login just fine.

can you post what plugins you uses using `dpkg -l | grep openm` so I can reproduce issue ?

I found what's wrong
just
apt-get install omvextras-common

Zitat von luxflow

I found what's wrong
just
apt-get install omvextras-common

That worked!

Thank you very much!

Zitat von subzero79

The problem is how postinst is fetching the daemon run status. Use to be "docker daemon" many months ago, now is dockerd. I committed the small fix to stoneburner branch at postrm and postinst

@ryecoaaron or @nicjo814 if you can build and upload a new package just for stoneburner

For stoneburner, the new version works (0.2.22).
Thanks.

Zitat von nicjo814

@anderbytes You have some really nice ideas and suggestions for improvements a few pages back, but as @subzero79 mentioned, I haven't done any coding on the plugin for quite some time now. However if/when I get the possibility to continue the work I'll make sure to have a look at your posts so please keep on writing down ideas like you do

If that's the way I can help... that's what you can expect from me.

When OMV 3 goes stable and this plugin too, I'll resume this improvements work

Hello...
I need a little help about handbrake. What to enter in the HOST and Container Path of the docker?
I already pulled https://hub.docker.com/r/pandrew/handbrake/

Thanks!

Zitat von subzero79

The plugin doesn't do interactive. Just run

docker run -it -v /input/path/videos:/videos pandrew/handbrake bash

And start using HandBrakeCLI inside the contaiso younmean i do than

so it looks like that i only run that when i need it?
Thanks

Hello, i get this error when I try tu uprade docker-engine on omv2

Anybody an idea?

root@openmediavault:~# apt-get upgrade
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete werden aktualisiert (Upgrade):
docker-engine
1 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert.
2 nicht vollständig installiert oder entfernt.
Es müssen noch 0 B von 28,1 MB an Archiven heruntergeladen werden.
Nach dieser Operation werden 116 kB Plattenplatz zusätzlich benutzt.
Möchten Sie fortfahren [J/n]? J
(Lese Datenbank ... 60970 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Ersetzen von docker-engine 1.12.0-0~wheezy (durch .../docker-engine_1.12.1-0~wheezy_amd64.deb) ...
Stopping Docker: dockerstart-stop-daemon: warning: failed to kill 2659: No such process
No process in pidfile '/var/run/docker-ssd.pid' found running; none killed.
invoke-rc.d: initscript docker, action "stop" failed.
dpkg: Warnung: Unterprozess altes pre-removal-Skript gab den Fehlerwert 1 zurück
dpkg: stattdessen wird Skript aus dem neuen Paket probiert ...
Stopping Docker: dockerstart-stop-daemon: warning: failed to kill 2659: No such process
No process in pidfile '/var/run/docker-ssd.pid' found running; none killed.
invoke-rc.d: initscript docker, action "stop" failed.
dpkg: Fehler beim Bearbeiten von /var/cache/apt/archives/docker-engine_1.12.1-0~wheezy_amd64.deb (--unpack):
Unterprozess neues pre-removal-Skript gab den Fehlerwert 1 zurück
dpkg: Fehler beim Aufräumen:
Unterprozess installiertes post-installation-Skript gab den Fehlerwert 1 zurück
Fehler traten auf beim Bearbeiten von:
/var/cache/apt/archives/docker-engine_1.12.1-0~wheezy_amd64.deb
Creating index of upgradeable packages ...
Creating index of openmediavault plugins ...
E: Sub-process /usr/bin/dpkg returned an error code (1)

@subzero79
Can you confirm if i understood it correctly... Checking the source of handbrake docker at pandrew/dockerfiles, it is actually using ubuntu's trusty?

deb http://ppa.launchpad.net/stebbins/handbrake-releases/ubuntu trusty main

try to install docker-gui 3.1.1 on omv 3.0.32 installer get error